Allied Telesis AT-S63 - Manual (Page 311)

AT-S63 Management Software Menus Interface User’s Guide
Section II: Advanced Operations 311
Creating an ACL
This procedure explains how to create an ACL. In order to perform this
procedure, you need to know the ID numbers of the classifiers that you
want to assign to the ACL. To view classifier ID numbers, refer to
“Displaying Classifiers” on page 299.
To create an ACL, perform the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
The Security and Services menu is shown in Figure 87 on page 291.
2. From the Security and Services menu, type 4 to select Access Control
Lists.
The Access Control Lists (ACL) menu is shown in Figure 100.
Figure 100. Access Control Lists (ACL) Menu
3. From the Access Control Lists (ACL) menu, type 1 to select Create
ACL.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Access Control Lists (ACL)
1 - Create ACL
2 - Modify ACL
3 - Destroy ACL
4 - Show ACL
P - Purge ACL
R - Return to Previous Menu
Enter your selection?