Allied Telesis AT-S63 - Manual (Page 208)

Chapter 11: File System
208 Section II: Advanced Operations
ˆ “Selecting the Active Boot Configuration File for the Switch” on
page 210
Creating a Boot Configuration File
To create a boot configuration file that contains the switch’s current
configuration, perform the following procedure:
1. From the Main Menu, type 5 to select System Administration.
The System Administration menu is shown Figure 4 on page 54.
2. From the System Administration menu, type 9 to select System
Utilities.
The System Utilities menu is shown in Figure 7 on page 61.
3. From the System Utilities menu, type 1 to select File Operations.
The File Operations menu is shown in Figure 61.
Figure 61. File Operations Menu
Note
Item 9, Format Flash Drive, and item F, Display Flash Information,
are described in “Working with Flash Memory” on page 223. Item C,
Display Compact Flash Information and item D, Compact Flash
Directory Configuration are described in “Working with the Compact
Flash Card” on page 225.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
File Operations
1 - Boot Configuration File ......... boot.cfg (Exists)
2 - Current Configuration ........... boot.cfg
3 - Create Configuration File
4 - Copy File
5 - Rename File
6 - Delete File
7 - View File
8 - List Files
9 - Format Flash Drive
F - Display Flash Information
C - Display Compact Flash Information
D - Set/Change Compact Flash Directory
R - Return to Previous Menu
Enter your selection?