Allied Telesis AT-S63 - Manual (Page 139)

AT-S63 Management Software Menus Interface User’s Guide
Section I: Basic Operations 139
Choose one of the following display types.
1 - Display All
This selection displays all dynamic addresses learned on the ports of
the switch and all static addresses that have been assigned to the
ports. An example of a unicast MAC address table is shown in Figure
36.
Figure 36. Display All Menu - Unicast MAC Addresses
Note
The first address in the unicast MAC address table is the address of
the switch.
A unicast MAC address table contains the following columns of
information:
MAC
The static or dynamic unicast MAC address.
Port
The port where the address was learned or assigned. The MAC
address with port 0 is the address of the switch.
VLAN ID
The ID number of the VLAN where the port is an untagged member.
Type
The type of the address: static or dynamic.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Display All
Page 1
Total Number of MAC Addresses: 121
MAC Address Port VLANID Type
------------------------------------------------------------
01:80:C1:00:02:01
0 0 Static (fixed, non-aging)
00:a0:d2:18:1a:c8 1 1 Dynamic
00:a0:c4:16:3b:80 2 1 Dynamic
00:a0:12:c2:10:c6 3 1 Dynamic
00:a0:c2:09:10:d8 4 1 Dynamic
00:a0:33:43:a1:87 5 1 Dynamic
00:a0:12:a7:14:68 6 1 Dynamic
00:a0:d2:22:15:10 7 1 Dynamic
00:a0:d4:18:a6:89 8 1 Dynamic
N - Next Page
U - Update Display
R - Return to Previous Menu
Enter your selection?