Allied Telesis AT-S63 - Manual (Page 46)

Chapter 2: Starting a Management Session
46 Section I: Basic Operations
The Main Menu is shown in Figure 3.
Figure 3. Main Menu
To select a menu item, type the corresponding letter or number.
To return to the command line interface, type C.
When you press the Esc key or type the letter R in a submenu, the
previous menu is redisplayed.
Note
You cannot operate both a local management session and a remote
management session on the same switch simultaneously.
Quitting a Local
Management
Session
To quit a local management session, return to the Main Menu and type Q
for Quit.
Note
Failure to properly exit from a local or Telnet management session
may block future management sessions.
You should always exit from a management session when you are
finished managing a switch. This prevents unauthorized individuals from
making changes to a switch’s configuration if you leave your management
station unattended. For information about how to use the console timer to
automatically disconnect a management session, refer to “Configuring the
Console Timer” on page 72.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Main Menu
1 - Port Configuration
2 - VLAN Configuration
3 - Spanning Tree Configuration
4 - MAC Address Tables
5 - System Administration
6 - Advanced Configuration
7 - Security and Services
8 - Enhanced Stacking
C - Command Line Interface
Q - Quit
Enter your selection?