Allied Telesis AT-S63 - Manual (Page 549)

AT-S63 Management Software Menus Interface User’s Guide
Section V: Spanning Tree Protocols 549
Displaying the
RSTP Port State
To display the RSTP port state, perform the following procedure:
1. From the Main Menu, type 3 to select Spanning Tree Configuration.
The Spanning Tree Configuration menu is shown in Figure 178 on
page 535.
2. From the Spanning Tree Configuration menu, type 3 to select
Configure Active Protocol.
The RSTP menu is shown in Figure 179 on page 537.
3. From the RSTP menu, type P to select RSTP Port Parameters.
The RSTP Port Parameters menu is shown in Figure 184 on page 545.
4. From the RSTP Port Parameters menu, type 3 to select Display RSTP
Port State.
The Display RSTP Port State menu is shown in Figure 187.
Figure 187. Display RSTP Port State Menu
The Display RSTP Port State menu displays a table that contains the
following information:
Port
The port number.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Display RSTP Port State
Port State Role P2P Version Port-Cost
--------------------------------------------------------------
1 Disabled
2
3
4
5
6
7
8
1
N - Next Page
U - Update Display
R - Return to Previous Menu
Enter your selection?