Allied Telesis AT-S63 - Manual (Page 206)

Chapter 11: File System
206 Section II: Advanced Operations
28*.cfg
Specifying the
File Location
When you work with files on a switch that supports a compact flash card,
the default file location for file system operations is flash memory. You can
use the Copy File, Rename File, Delete File, View File, and List Files
selections on the File Operations menu (see Figure 61 on page 208) to
work with files in flash memory or on a compact flash card by specifying
the file location. To specify the file location as flash memory, precede the
file name with “flash:.,” For example:
flash:boot.cfg
To specify a file located on a compact flash card, precede the name with
“cflash:,” for example:
cflash:switch12.cfg
If you do not specify a location, the default is flash memory.