Allied Telesis AT-S63 - Manual (Page 377)

AT-S63 Management Software Menus Interface User’s Guide
Section II: Advanced Operations 377
Description
A description of the policy.
Active
The status of the policy. A policy that is assigned to one or more ports
is deemed active while a policy that is not assigned to any ports is
deemed inactive.
5. To display the specifics of a policy, type D to select Display Policy
Details.
The following prompt is displayed:
Available Policy(ies): 0-4
Enter Policy ID : [0 to 255] -> 0
6. Enter the ID number of the policy you want to view. You can display
only one policy at a time.
The Display Policy Details menu is shown in Figure 133.
Figure 133. Display Policy Details Menu
The Display Policy Details menu provides the following information:
Policy ID
The policy ID number.
Description
The policy description.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Display Policy Details
1 - Policy ID ................ 11
2 - Description .............. policy_ca2
3 - Remark DSCP .............. None
4 - DSCP value ............... 42
5 - ToS ......................
6 - Move ToS to Priority ..... No
7 - Move Priority to ToS ..... No
8 - Send to Mirror Port ...... No
9 - Traffic Class List .......
A - Redirect Port ............
B - Ingress Port List ........ 15
D - Egress Port ..............
U - Update Display
R - Return to Previous Menu
Enter your selection?