Samsung SCH-S960RWBTFN - Manual (Page 92)

Mounting the SD Card
To store photos, music, videos, and other applications. You must
mount (install) the SD card prior to use. Mounting the SD card
establishes a USB connection with your computer.
Important! You must enable USB storage to mount the SD card.
1. From the Home screen, press and then tap Settings ➔
Storage.
2. Tap Mount SD card.
Communicating with the SD card
1. Insert the SD card into the external, SD card slot (For more
information, refer to “Installing the microSD Memory Card” on
page 12.)
2. Verify the card is properly mounted.
Note: Your device is configured to be used as a storage/media device
by default. If it does not respond properly, you will need to verify
the Debugging mode is not enabled.
3. Configure the device for USB storage mode connection by
verifying Debugging mode is not enabled:
• From the Home screen, press and then tap Settings ➔
Developer options.
• Remove a check mark from the USB debugging field, if present.
• For more information, refer to “USB Debugging” on page 427.
87