Samsung SCH-S960RWBTFN User Manual
Page 276
Important! The AllShare Cast Hub is a 1-to-1 connection. If a previous
device was paired to the Hub and is still connected to the
AllShare Cast Hub, you can not pair a new device until the
first connection is stopped.
•
I have a new device and the hub is connected but it doesn’t show up in my
list:
• Force the hub to disconnect from any previously paired devices:
–
Press and hold the RESET button (on the back of the hub),
for about FOUR seconds until the LED begins to blink RED.
–
Access your new device’s AllShare Cast screen and rescan for the existing
hub/dongle.
–
Press the RESET button on the hub for ONE second until the LED turns
BLUE.
–
Tap the entry from your device’s AllShare Cast screen and confirm
connection.
AllShare Cast Hub - Streaming Videos
The hub supports streaming of purchased media content that
contains DRM (Digital Rights Management).
Note: You can control the volume level of your playback file being
shown on your TV by using your device’s Volume buttons. For
additional volume, use your TV’s volume controls.
271