HP Secure Key Manager - Manual (Page 292)

Syntax
hostname (config)# edit ras settings
Available IP addresses:
1.
All
2. 192.168.200.195
Web Admin Server IP [192.168.200.195] (1-2): 2
Web Admin Server Port [9443]: 9443
Web Admin User Authentication (y/n) [n]: n
Available IP addresses:
1.
All
2. 192.168.200.195
SSH Admin Server IP [192.168.200.195] (1-2): 2
SSH Admin Server Port [22]:
Related
command(s)
• show ras settings
hostname – define the hostname of the SKM.
Syntax hostname (config)# hostname
Related
command(s)
• show hostname
no ntp server – delete an NTP server.
Syntax
hostname (config)# no ntp server
Related
command(s)
• show ntp
• ntp
• ntp synchronize
ntp – set the NTP values for the SKM.
Syntax
hostname (config)# ntp
Enable NTP [y]:
NTP Server 1 [None]:
NTP Server 2 [None]:
NTP Server 3 [None]:
Poll Interval (min) [30]:
NTP settings successfully saved
Related
command(s)
• show ntp
• no ntp server
• ntp synchronize
ntp synchronize – immediately synchronize the clock on the SKM against the NTP server.
Syntax
hostname (config)# ntp synchronize
Related
command(s)
• show ntp
• ntp
• no ntp server
recreate ssh key – recreate the Secure Shell key.
NOTE:
If you execute the recreate ssh key command from a secure shell client, the system will log you out
of your SSH session.
Syntax hostname (config)# recreate ssh key
292 Using the Command Line Interface