HP Secure Key Manager - Manual (Page 179)

Table 86 Create Cluster section components
Component Description
Local IP
The IP of the current device. If the device has multiple network interfaces, the
pull-down menu lists all available interfaces.
Local Port
The port on which the device listens for cluster administration requests.
CAUTION:
The cluster port (typically 9001) must be different from the KMS Server port
(typically 9000).
Cluster Password
The password for the cluster. The requirements for the cluster password depend on
your Password Management Settings. For information on password requirements,
refer to Password Constraints .
Confirm Cluster
Password
Re-enter the cluster password.
Create
Click Create to create the cluster. A new cluster key is internally created, and this
device appears in the Cluster Members list.
Join Cluster
Use this section to add the device to an existing cluster. You must know the IP and port number of
another member of the cluster, and you need a local copy of the cluster key and the cluster password.
A device can be a member of only one cluster.
Figure 107 Viewing the Join Cluster section
The following table describes the components of the Join Cluster section.
Secure Key Manager 179