HP Secure Key Manager - Manual (Page 163)

Table 76 FIPS Status Report components
Component Description
Product Displays the model of your device.
Unit ID The Unit ID is composed of alphanumeric characters.
Hostname The hostname is the name used to identify the SKM on the network.
IP Address(es) This field specifies the IP address(es) on which the KMS Server is enabled on the SKM.
Device State
Indicates the current state of the device, either normal or error. When the device
is in an error state, functionality is dramatically limited: you will not be able to
communicate with the device using the CLI, the Management Console, or the XML
Interface. Limited access to the device via the serial console will be supported. Reboot
the device to restore functionality. If the problem persists, contact customer support.
FIPS Mode Enabled Indicates if the device is FIPS-compliant.
Test Results
Displays the result and timestamp for each of the following self-tests:
• AES Encryption
• DES Encryption
• DSA Encryption
• HMAC Algorithm
• SHA-1 Algorithm
• SHA2–256 Algorithm
• SHA2–384 Algorithm
• SHA2–512 Algorithm
• RSA Encryption
• X9.31 PRNG
• Continuous Random Number Generation
• RSA Pairwise Consistency
• DSA Pairwise Consistency
• Software Integrity
If the device enters an error state, reboot. If the error persists, contact customer support.
FIPS Status Server page
The FIPS Status Server page enables you to manage the FIPS status server. The FIPS status server monitors
for FIPS-related status and error messages. If the device self-test fails upon start-up, all other services on
the device shutdown, including the Management Console. Only the FIPS status server continues to
run in this state.
This page contains the following section:
• FIPS Status Server Settings
FIPS Status Server Settings
Use this section to enable the FIPS Status Server and select the IP and port used to access the status report.
Secure Key Manager 163