HP Secure Key Manager - Manual (Page 194)

Table 99 SNMPv1/SNMPv2 Community List section components
Component Description
Community Name
Community names can contain only alphanumeric characters and punctuation marks
and they cannot contain non–printing characters and whitespaces. Community names
cannot exceed 64 characters.
Source IP/Subnet
Mask(s)
IP address(es) allowed to access the agent. You can enter a specific IP address range,
or you can enter a value of “any”. If you are listing a specific IP address, you must also
include the Subnet Mask. Separate the IP address and Subnet Mask with a slash (/). If
you are entering multiple IP address/Subnet Mask pairs, you must separate each IP
address/Subnet Mask pair with a comma (,).
IMPORTANT:
We recommend that you limit access to the agent to particular IP addresses.
MIB Access
• Enterprise: Contains caching, SSL, CPU utilization, and operational statistics.
• Standard: Also known as MIB–II, the standard MIB contains information on network
interface utilization, system health, and statistics for IP, TCP, ICMP, UDP, and SNMP.
Edit
Click Edit to change the community name, source IP/subnet mask, or the MIB access
for the community.
Add Click Add to add a community to the SKM.
Delete Click Delete to remove a selected community from the SKM.
SNMPv3 Username List
As the name suggests, the SNMPv3 Username List is used to configure the agent to communicate
with an NMS running SNMPv3 software. You can think of this section much in the same way as the
SNMPv1/SNMPv2 Community List in that the SNMPv3 Username List defines from which management
stations the SKM receives SNMP MIB requests. The main difference is that usernames are specific to
SNMPv3. Because SNMPv3 offers authentication and privacy, there is more to configure when creating
an SNMPv3 Username as opposed to a community.
NOTE:
If you are configuring the agent to communicate with an NMS running SNMPv1/v2 software, you can
disregard this section.
Figure 120 Viewing the SNMPv3 Username List section
The following table describes the components of the SNMPv3 Username List section.
194 Using the Management Console