HP Secure Key Manager - Manual (Page 280)

Syntax
NOTE:
The no ip authorization allowed command requires that you provide the index
number of the IP address you want to edit, rather than the actual IP address itself.
You might find it helpful to use the show ip authorization allowed command to find
the appropriate index number.
hostname (config)# no ip authorization allowed 3
IP successfully removed.
Related
command(s)
• edit ip authorization allowed
• ip authorization
• ip authorization allowed
• show ip authorization
• show ip authorization allowed
no ip name–server – delete a domain name server from the SKM.
Syntax
hostname (config)# no ip name-server ...
Related
command(s)
• ip name-server
• show hosts
no static route – delete a static route on the SKM.
Syntax hostname (config)# no static route
Related
command(s)
• static route
• show static route
show ethernet port – view the Network Interface Port Speed/Duplex settings
Syntax
hostname# show ethernet port
Related
command(s)
• ethernet port
show gateway – show the current gateway.
Syntax
hostname# show gateway
Related
command(s)
• gateway
• no gateway
show hosts – view currently configured domain name servers.
Syntax
hostname# show hosts
Related
command(s)
• ip name-server
• no ip name-server
show interface ethernet – view interface detail for a specified Ethernet port.
Syntax hostname# show interface ethernet
Related
command(s)
• ip address
• no ip address
• show interfaces
show interfaces – view all network interfaces on the system.
Syntax
hostname# show interfaces
Related
command(s)
• ip address
• no ip address
• show interface ethernet
show ip authorization – display whether each server grants access to all IPs or only grants access to
specific IPs.
280 Using the Command Line Interface