HP Secure Key Manager - Manual (Page 196)

Table 101 SNMP Management Station List section components
Component Description
Manager Type
The SNMP version used on the NMS. All three versions of SNMP are supported on
the SKM.
Trap Type
Specifies whether this NMS is configured to receive Trap of Information messages.
NOTE:
We recommend that you always use Inform messages.
Hostname or IP The hostname or IP address of the NMS.
Port Port on which the NMS is listening for SNMP traffic. The default is 162.
Management
Community or
Username
Displays either the management community or username. The management community
is used to send SNMP data to the SNMPv1/v2 management stations. The manager
community is used by SNMPv1/v2 management stations to filter SNMP traps and is not
related to the agent community name. The Manager Community name cannot exceed
64 characters. The username is used to send SNMP data to SNMPv3 management
stations. The username is used to create a key that is shared by the agent and the NMS.
Delete Click Delete to remove a selected NMS from the SKM.
Properties
Click Properties to view the extended properties of an NMS. From the properties page,
you can edit any of the values associated with the NMS.
SNMP Management Station Properties
The SNMP Management Station Properties page allows you to view and modify the extended properties
of an NMS defined on the SKM.
Figure 122 Viewing the SNMP Management Station Properties section
The following table describes the components of the SNMP Management Station Properties section.
196 Using the Management Console