3 vtl (virtual tape libraries) functions, Fibre channel settings tab, Licensing requirements – HP StoreOnce Backup User Manual
Page 21: Vtl configuration page
3 VTL (Virtual Tape Libraries) functions
The following topics are covered in this chapter:
•
•
•
Make Replication Target libraries visible to the host (page 36)
Licensing requirements
•
No licensing is required for VTL emulations unless using the Security features, Data at Rest
Encryption, and Secure Erase.
•
VTL replication requires a license (per couplet) on the target site, but only if VTL replication is
used on that couplet.
•
Replication encryption using IPSEC is part of the Security license but is enabled via the CLI.
See the HP StoreOnce Backup system CLI Reference Guide.
VTL Configuration page
Select VTL from the HP StoreOnce menu to display the current VTL configuration.
The HP StoreOnce–VTL page includes the following tabs:
•
Fibre Channel Settings tab (page 21)
NOTE:
Equivalent StoreOnce CLI commands are available for the tasks described in this section.
See the HP StoreOnce Backup system CLI Reference Guide.
The top half of this page displays available service sets. Click on the service set to display the Fibre
Channel Settings tab for the VTL devices configured for that service set in the lower half of the
page.
Fibre Channel Settings tab
Table 6 Fibre Channel settings
Description
Setting
Four Fibre Channel ports are on each node, and therefore four ports are available for
each service set.
Port
See also
Port assignment for StoreOnce Backup systems (page 22)
.
VTL Configuration page
21