HP StoreOnce Backup - Manual (Page 190)

1. Configure the CIFS Server mode for both nodes (service sets) within the couplet. You can only
connect to one domain across a couplet. The following example illustrates CIFS Server setup
for Service Set 1. See
CIFS Server tab (page 38) for more information about using this page.
2. Create the shares for Service Set 1 and Service Set 2, as described in Shares (NAS) (page 51) .
The following example shows the shares for Service Set 1.
3. The shares will be managed through AD. You can access all configured shares through the
Windows MMC console. The following example shows the MMC console for the shares on
Service Set 1. Shares that you have created on the GUI for Service Set 2 would be viewed
separately by selecting the appropriate item in the left-hand panel.
190 Advanced troubleshooting