HP StoreOnce Backup - Manual (Page 183)

Figure 13 Node numbering in the HP StoreOnce B6200 Backup system
Location Description Node
Rack 1, shelves 9–10 Node 1, lower server in couplet 1, exists in
all installations 1
Rack 1, shelves 11–12 Node 2, top server in couplet 1, exists in all
installations 2
Rack 1, shelves 29–30 Node 3, lower server in couplet 2, if
installed 3
Rack 1, shelves 31–32 Node 4, top server in couplet 2, if installed 4
Rack 2, shelves 9–10 Node 5, lower server in couplet 3, if two
racks installed 5
Rack 2, shelves 11–12 Node 6, top server in couplet 3, if two racks
installed 6
Rack 2, shelves 29–30 Node 7, lower server in couplet 4, if
installed 7
Rack 2, shelves 31–32 Node 8, top server in couplet 4, if installed 8
3. Allow each server to complete its process to the login stage. Connect a VGA monitor and
keyboard to each node and check that the console output shows a login prompt. (This step is
optional but strongly recommended because it provides information about the node boot up.)
Power off and power on 183