HP StoreOnce Backup - Manual (Page 129)

Value Name
The system name, which is only relevant at the top level of Hardware. System Name
The Status of the element, useful for troubleshooting to identify elements that
are down or degraded. Status
The worst status of the components in the hierarchy below this item. If there is
a fault, drill down into the lower elements in the hierarchy to get further Rolled Up Status
information. If alerting and SNMP have been enabled, messages will be sent
to you automatically identifying the source of the problem.
Contains any diagnostic messages. Diagnostic Messages
Varies according to the hardware element. Additional Properties
Monitoring the StoreOnce Backup server
The server hardware structure is not identical for all models. The examples shown below relate to
HP StoreOnce HP 6500 Backup systems. Where appropriate, differences are noted below.
NOTE: There is a server entry for each node in the StoreOnce Backup system. For example, a
single couplet system has two server entries; a four couplet system has eight server entries. The
node name is included in the server field to aid identification. There is also a Failback This Server
button at the top of the node page that allows you to bring a failed node back into a cluster, once
the problem that caused the node to fail has been resolved.
Monitoring the StoreOnce Backup server 129