HP XP P9500 Storage - Manual (Page 81)

Manual execution mode
In Manual execution mode, you can manually collect monitoring data and relocate a tier. You can
execute commands to do the following:
1.
Start monitoring.
2. Stop monitoring.
3. Perform tier relocation.
The following illustrates tier relocation processing when in Manual execution mode:
Viewing monitor and tier relocation information
If the raidcom get thp_pool command is executed by specifying the -key opt option,
monitoring information and tier relocation information appear. For details about the raidcom
get thp_pool
command, see HP P9000 RAID Manager Reference Guide. Items appear as
follows:
•
STS
This item displays the operational status of the performance monitor and the tier relocation.
◦ STP: The performance monitor and the tier relocation are stopped.
◦ RLC: The performance monitor is stopped. The tier relocation is operating.
◦ MON: The performance monitor is operating. The tier relocation is stopped.
◦ RLM: The performance monitor and the tier relocation are operating.
•
DAT
This item shows the status of the monitor information.
◦ VAL: Valid
◦ INV: Invalid
◦ PND: Calculating
•
R(%)
This item shows the progress percentage of tier relocation.
0 to 99: Shows one of the following statuses.
◦ When the value of STS is RLC or RLM: Relocation is in progress.
◦ When the value of STS is STP or MON: Relocation is suspended.
100: Appears when the relocation operation is not in progress, or the relocation has completed.
Smart Tiers 81