HP XP P9500 Storage - Manual (Page 309)

Description Item
Emulation types for each logical volume (or logical device). For LUSE
volumes, an asterisk (*) and a number appear on the right of the emulation Emulation Type
type. For example, OPEN-9*3 indicates that three OPEN-9 volumes are
combined.
Size of each logical volume. Capacity
Provisioning types for each logical volume. Provisioning Type
Number of assigned LUNs for the relevant LDEV. LUN ID ((number of LUNs) Sets of
Paths)
Name of the port and the host group of the assigned LUNs. Assigned LUN
IDs also appear. port ID / host group name
Create Host Groups wizard
Create Host Groups window
Description Item
Enter the name of the host group. Host Group Name
As a host group name, you can use single-byte ASCII characters
(alphanumeric characters and symbols) up to 64 characters. You cannot
use the following symbols: \ / : , ; * ? " < > |
You cannot use blanks at the beginning or end of the host group name.
Select the resource group in which the host group is created. If Any is
selected, among all ports being allocated to the user, ports where the host Resource Group Name (ID)
group can be add are available in the Available Ports table. If other than
Any is selected, among ports assigned to the selected resource group, ports
where the host group can be add are available in the Available Ports table.
Select the host mode from the list. Host Mode
Adds the settings on the left of the window to the Selected Host Groups table
on the right of the window. Add
Create Host Groups wizard 309