HP XP P9500 Storage - Manual (Page 209)

Description Item
Number of allocated V-VOLs for the mainframe system. Mainframe V-VOLs
Total number of LDEVs. Total Number of LDEVs
LDEVs tab
Description Item
LDEV identifier, which is the combination of LDKC, CU, and LDEV. LDEV ID
LDEV name. LDEV Name
LDEV status. Status
Normal: Normal status.
Blocked: Blocked status. Host cannot access to the blocked volumes.
Warning: Something is wrong with the volumes.
Formatting: The volumes are being formatted.
Preparing Quick Format: The volumes are in preparation of Quick Format.
Quick Formatting: The volumes are being quick-formatted.
Correction Access: Access attribute is being repaired.
Copying: Data in the volumes are being copied.
Read Only: The volumes are read only. Data cannot be written on the read-only volumes.
Shredding: The volumes are being shredded.
Any status other than the above.
Parity group identifier. Parity Group ID
Pool name (pool identifier). Pool Name (ID)
RAID level. An asterisk (*) indicates that the parity group that the LDEV belong to is interleaved
(concatenated). RAID Level
Emulation type. Emulation Type
LDEV capacity. Capacity
Provisioning type to be assigned to the LDEV. Provisioning Type
•
Basic: Internal volume.
•
THP: THP V-VOL.
•
External: External volume.
• Snapshot: Snapshot volumes
Attribute of the volume indicating how the LDEV is being used. Attribute
•
Command Device: The volume is a command device.
• Remote Command Device: The volume is a remote command device.
•
System Disk: The volume is a system disk.
• JNL VOL: The volume is a journal volume.
•
Pool VOL: The volume is a pool volume. The number in the parentheses shows the pool
identifier.
• Reserved VOL: The volume is a reserved volume.
Window after selecting Logical Devices 209