HP XP P9500 Storage - Manual (Page 163)

Standard, and the host group name is initialized. To remove all the WWNs and LU paths from
host group 0, you must initialize the host group 0. For details, see
“Initializing host group 0” (page
161) .
Procedure 31 To delete a host group
1. Click Ports/Host Groups in the Storage Systems tree.
The list of available ports appear in the tree.
2. Select the Host Groups tab, or select a port from the tree and then select the Host Groups tab.
3. Select a host group that you want to delete.
4. Select Delete Host Groups.
5. In the Delete Host Groups window, confirm the settings, in Task Name type a unique name
for this task or accept the default, and then click Apply.
If Go to tasks window for status is checked, the Tasks window opens.
Managing hosts 163