HP XP P9500 Storage - Manual (Page 240)

Description Item
The LDEV status icons indicate:
: Normal LDEV.
Expanded (LUSE) volume
• An LDEV number ending with # (for example, 00:00:01#) indicates that the LDEV is an
external volume. For details regarding external volumes, see the HP P9000 External Storage
for Open and Mainframe Systems User Guide.
• An LDEV number ending with V (for example, 00:00:01V) indicates that the LDEV is a virtual
volume (V-VOL) for Snapshot. For details regarding V-VOLs, see the HP P9000 Snapshot
User Guide.
Capacity of the LDEV. Capacity
RAID level of the LDEV. The RAID level is left unspecified with a hyphen (-) when the LDEV is an
external LU or virtual volume (V-VOL). RAID
Data protection level on the LDEV. Protection
•
SATA-W/V: Indicates the data protection level if the write and verify mode is set on a SATA
drive.
• SATA-E: Indicates the data protection level if the Enhanced mode is set on a SATA drive.
•
Standard: Indicates that a SAS drive, SSD, external volume, or virtual volume (V-VOL) is
being used.
Parity group. If the LDEV extends over two or more parity groups, the PG column shows the
smaller parity group number. PG
A parity group number starting with E (for example, E1-1) indicates that the parity group consists
of one or more external LUs.
A parity group number starting with V (for example, V1-1) indicates that the parity group consists
of one or more virtual volumes (V-VOLs).
Cache logical partition number. CLPR
For detailed information about CLPRs, see the HP P9000 Cache Partition User Guide.
Number of LDEVs selected in the Free LDEVs table. Selected LDEVs
RAID Concatenation dialog box
Use this dialog box to view concatenated parity groups.
240 LUSE GUI reference