HP XP P9500 Storage - Manual (Page 257)

Description Item
The default value of the SSD is 0%. The default value other than for the SSD
is 8%.
• Tier 3: Type an integer value from 0 to 50 as the percentage (%) to set for
tier 3. The default value depends on the drive type of the pool-VOL in tier 3.
The default value of the SSD is 0%. The default value other than for the SSD
is 8%.
Defines the size of the buffer space to be used for new page assignments on
each tier. These values can be set only when Smart Pool is available. Buffer Space for Tier Relocation
•
Tier 1: Type an integer value from 2 to 40 as the percentage (%) to set for
tier 1. The default is 2%.
•
Tier 2: Type an integer value from 2 to 40 as the percentage (%) to set for
tier 2. The default is 2%.
•
Tier 3: Type an integer value from 2 to 40 as the percentage (%) to set for
tier 3. The default is 2%.
When you click Add, the configured information is added to the right Selected
Pools table. Add
Create Pools wizard 257