Changing a host group's name and host mode, Change host group dialog box – HP StorageWorks XP10000 Disk Array User Manual
Page 93
Changing a host group's name and host mode
NOTE:
•
You cannot perform this operation on host groups for initiator ports.
•
You cannot perform this operation on host groups for NAS ports.
CAUTION:
Before changing a host group's host mode, HP recommends that you first back up data on the port the
host group belongs to. The operation for changing the host mode should not be destructive, but data
integrity cannot be guaranteed without a backup.
1.
Start LUN Manager. The LUN Manager pane (
) appears.
2.
In the tree, right-click the host group, and select Change Host Group. The Change Host Group
dialog box appears.
Figure 47 Change Host Group dialog box
3.
To change the name of the host group, enter a new name in the Group Name box.
To change the host mode (
), select the new host mode from the Host Mode list.
4.
If necessary, click Option, and select host mode options. For more information about host mode
options, see
.
HP StorageWorks LUN Configuration and Security Manager XP user guide for the
XP12000/XP10000/SVS200
93