HP StorageWorks XP10000 Disk Array - Manual (Page 176)

Table 36 Volume status
Status Description
Normal Volume is in a normal status.
Blocked Volume is in a blocked status. Hosts cannot access the blocked volume.
Warning Volume has a problem.
Format Volume is being formatted.
Correction Access Volume's access attribute is being changed.
Copying Volume's data is being copied.
Read Only Hosts can only read the volume. Hosts cannot write data to a volume in Read
Only status.
Shredding Shredding operation is in progress.
Unknown System does not recognize the volume's status.
• Attribute: Volume's attribute.
Table 37 Volume attributes
Attribute Description
Pool (pool-id) Volume is a pool volume (pool-VOL). The pool ID is enclosed by parentheses.
JNL Volume Volume is a journal volume.
Progress bar
Displays the operation's progress.
Buttons
• LDEV Status: Displays the current volume status.
• Shredding Param: Displays the Shredding Param (Parameter) pane. You can define shredding
settings in the Shredding Param pane.
• Download: Downloads the file containing Shredding operation results that have been performed.
• Apply: Implements settings made in this pane.
• Cancel: Cancels settings made in this pane.
Volume to Space Confirmation pane
This pane appears before the Volume to Space function starts. Confirm the volumes you want to initialize
to spaces.
NOTE:
An error occurs if volumes selected as targets of the Volume to Space function include a volume that
cannot be processed by the Volume to Space function (see Volume Manager guidelines ).
176 Custom Volume Size operations