Iscsi name table, Ldev table, Wwn name table – HP StorageWorks XP10000 Disk Array User Manual
Page 65
Figure 19 WWN name table
•
Port: List of ports. The port's fibre address appears on the right of the port name.
•
Host Group: Host groups that are used to classify server hosts connected to the array. You must
create host groups in the LUN Manager pane.
•
Name: Host bus adapter's nickname. You can specify nicknames in the LUN Manager pane.
•
WWN: Host bus adapter's World Wide Name.
iSCSI name table
Lists host bus adapters connected to the iSCSI ports on the array.
Figure 20 iSCSI name table
•
Port: List of ports.
•
Target name: iSCSI targets are used to classify server hosts connected to the array. You must
create iSCSI targets in the LUN Manager pane.
•
Name: Host bus adapter's nickname. You can specify nicknames in the LUN Manager pane.
•
iSCSI name: Host bus adapter's iSCSI name.
LDEV table
Lists logical volumes in the array.
•
CU: List of CU images.
•
LDEV: Logical volumes. The CU image number appears on the left of the colon. The LDEV number
appears on the right of the colon. The combination of a CU image number and an LDEV number
identifies a logical volume.
HP StorageWorks LUN Configuration and Security Manager XP user guide for the
XP12000/XP10000/SVS200
65