Ldev information table, Ldev status icons – HP StorageWorks XP10000 Disk Array User Manual
Page 160
Table 32 LDEV status icons
Icon
LDEV status
Normal LDEV
Variable-sized volume (CV)
Expanded (LUSE) volume
LDEV Information table
This table is in the upper-right of the Volume Manager pane, and displays data for the LDEV you select
in the LDEV Information tree.
The LDEV Information table displays detailed information for all open-system LDEVs in the selected CU. If
you select a normal LDEV, the information in this table is for the top LDEV. If you select a LUSE volume, the
information in this table is for all LDEVs in the LUSE volume. The table displays the following information:
•
LDEV: LDEV status icon (
) and the CU and LDEV numbers. If the selected LDEV is a LUSE
volume, the LDEV number of the top LDEV in the LUSE volume appears.
NOTE:
If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. For more
information about external LUs, see the
HP StorageWorks External Storage XP user guide
.
NOTE:
If an LDEV number ends with V (for example, 00:01V), the LDEV is a virtual volume (V-VOL). For
more information about V-VOLs, see the
HP StorageWorks Snapshot XP user guide
.
•
Emulation: Emulation type. If the selected LDEV is a LUSE volume, the emulation type appears
with an asterisk and the number of volumes in the LUSE volume (for example, OPEN-E*5). If the
selected LDEV is a CVS volume, the emulation type appears with CVS (for example, OPEN-3 CVS).
•
Capacity: LDEV capacity in either MB or GB, depending on the unit selected in the Capacity
Unit box.
•
RAID: LDEV's RAID level.
NOTE:
The RAID level is left unspecified with a hyphen (-) when the LDEV is an external LU or virtual
volume (V-VOL).
•
PG: Combination of the disk group and parity group. If the LDEV extends over two or more parity
groups, the smaller parity group number appears.
NOTE:
If a parity group number starts with E (for example, E1-1), the parity group consists of one or more
external LUs.
NOTE:
If a parity group number starts with V (for example, V1-1), the parity group consists of one or
more virtual volumes (V-VOLs).
160
Volume Manager operations