Port information list, Fc switch information list, Authentication information (target) list – HP StorageWorks XP10000 Disk Array User Manual
Page 77: Fibre folder, Iscsi folder, Iscsi port and iscsi target status icons
Figure 34 iSCSI folder
Table 15 iSCSI port and iSCSI target status icons
Icon
Status
CLX-Y
iSCSI port.
iSCSI name
iSCSI target performs authentication of hosts.
iSCSI name
iSCSI target does not perform authentication of hosts.
Port Information list
•
Port Name: Fibre Channel port name. For more information, see
,
and
.
•
Time out: Period of time between authentication sessions to the same port. If the previous
authentication session to a port failed, the next authentication session starts after the specified
period of time elapses. The unit is seconds.
•
Refusal Intvl.: If authentication fails for the number of times specified in Refusal Freq., connection
to the port fails. Refusal Intvl. is the interval from when connection to a port fails to when the next
authentication session starts. The unit is minutes.
•
Refusal Freq.: Number of times of authentication for connecting to a port is allowed. If
authentication fails for the specified number of times, connection to the port fails.
FC Switch Information list
•
Port Name: Fibre Channel port name. For more information, see
,
and
.
•
User Name: Fibre Channel switch's user name.
•
Mode: Mode of authentication between ports and Fibre Channel switches. If the authentication
mode is mutual, bi-directional appears. If the authentication mode is not mutual, unidirectional
appears.
•
Authentication: Specifies if authentication for the Fibre Channel switch is performed. If the Fibre
Channel switch is a target of user authentication, Enable appears. If the host is not a target of
user authentication, Disable appears.
Authentication information (Target) list
Fibre folder
Displays user information for host groups allowed to connect to the port or host group selected in the tree.
•
Group Name: Host group name.
•
User Name: Host group's user name. When a user name is not defined for a host group, this
column is blank.
HP StorageWorks LUN Configuration and Security Manager XP user guide for the
XP12000/XP10000/SVS200
77