Add new iscsi target pane – HP StorageWorks XP10000 Disk Array User Manual
Page 85
The following procedure describes how to create iSCSI targets. The procedure for registering hosts to an
iSCSI target is described in
Registering hosts in host groups
1.
Start LUN Manager. The LUN Manager pane (
) appears.
2.
Right-click the port for which you want to create an iSCSI target, and select Add New iSCSI Target.
The Add New iSCSI Target pane appears.
Figure 37 Add New iSCSI Target pane
3.
In the Target name box, enter the iSCSI target name.
In the Target name box, the initial value in iqn format appears as a default value. iSCSI target names
must be specified in either of the following formats:
• eui format:
An IEEE 64-bit Extended Unique Identifier used to specify an iSCSI name. The iSCSI name
begins with eui. and is followed by the ID found by the vendor in EUI-64 format similar to the
World Wide Name.
Example: eui.02004567A425678D
• iqn format:
The iSCSI Qualified Name format used to specify an iSCSI name. For more information about
specifying iSCSI names using this format, see the iSCSI-related documentation.
If a host is connected to an iSCSI port, LUN Manager automatically displays the iSCSI name in
iqn format. iSCSI names can include 0 (zero) to 9, and a to f (letters are case-insensitive).
Example: iqn.2006.01.com.hp:iscsi-r500:model-xxx:sn-xxxxxx:lun00
The length of an iSCSI name must be 20 characters in eui format, and up to 223 characters in iqn
format. iSCSI names can include letters, numbers, periods (.), hyphens (-), and colons (:); but cannot
include double-byte characters. iSCSI names are case-insensitive.
4.
In the Target alias box, enter the iSCSI target's alias.
iSCSI target aliases can include letters, numbers, periods (.), hyphens (-), and colons (:); but cannot
include double-byte characters. iSCSI target aliases are case-sensitive. An iSCSI target alias can
consist of up to 32 characters
5.
In the Host Mode list, select a host mode. When selecting a host mode, you must consider the
platform and other factors (for more information, see
CAUTION:
Do not select Reserve from the list. Reserve indicates that the host mode is not currently
supported.
6.
If necessary, click Option, and select host mode options. For more information about host mode
options, see
.
HP StorageWorks LUN Configuration and Security Manager XP user guide for the
XP12000/XP10000/SVS200
85