HP StorageWorks XP10000 Disk Array - Manual (Page 118)

Figure 65 Delete Authentication Information pane
4. Click OK.
5. Click Apply. A confirmation message appears.
6. Click OK. Settings are applied to the array.
Specifying a host group's user information (when performing mutual
authentication)
To perform mutual authentication, you must specify user information for host groups on array's ports.
Specify unique user information for each host group. You can change the specified user information for
host groups the same way you specified them initially.
1. Start LUN Manager and display the Authentication pane ( Figure 31 ).
2. In the Port tree, select the port or host group whose user information you want to specify. Currently
registered user information for the selected port or host group appears in the Authentication
Information (Target) list.
3. Right-click any point in the Authentication Information (Target) list, and select Specify Authentication
Information. The Specify Authentication Information pane appears.
Figure 66 Specify Authentication Information pane
Specify the following user information for the port or host group selected in the Port tree:
• Port Name: Selected port's port name. You cannot change the port name.
118 LUN Manager operations