HP StorageWorks XP10000 Disk Array - Manual (Page 162)

NOTE:
The RAID level is left unspecified with a hyphen (-) when the LDEV is an external LU or virtual
volume (V-VOL).
• PG: Combination of the disk group and parity group. If the LDEV extends over two or more parity
groups, the smaller parity group number appears.
NOTE:
If a parity group number starts with E (for example, E1-1), the parity group consists of one or more
external LUs.
NOTE:
If a parity group number starts with V (for example, V1-1), the parity group consists of one or
more virtual volumes (V-VOLs).
• CLPR: CLPR number and name. The CLPR number consists of two digits. The CLPR name consists
of up to six characters. For more information about cache logical partitions (CLPRs), see the
HP StorageWorks XP Disk/Cache Partition user guide.
• Selected LDEVs: Number of LDEVs selected in the Free LDEVs table.
Expanded LDEVs list
Displays LDEVs selected as LUSE volume components. An LDEV is added to this list by clicking Add.
• Selected LDEVs: Number of LDEVs selected in the Expanded LDEVs list.
• Number of LDEVs: Number of LDEVs displayed in the Expanded LDEVs list.
• Size: Total capacity of LDEVs displayed in the Expanded LDEVs list, in either GB or MG.
Buttons
• Add: Moves the selected LDEV from the Free LDEVs table to the Expanded LDEVs list.
• Delete: Move the selected LDEV from the Expanded LDEVs list to the Free LDEVs table.
• Set: Creates a LUSE volume consisting of the volumes currently in the Expanded LDEVs list. The
new LUSE appears in blue bold italics on the LDEV Information table, but is not actually created
until you click Apply.
• Apply: Implements settings on the array.
• Cancel: Cancels settings.
Volume Manager operations shortcut menu
When you right-click one of the LDEVs in the LDEV Information table on the Volume Manager pane, a
shortcut menu listing commands for Volume Manager operations appears.
Figure 85 Volume Manager operations shortcut menu
•
Set LUSE Volume
162 Volume Manager operations