HP StorageWorks XP10000 Disk Array - Manual (Page 189)

• Cancel: Cancels the selected settings, and returns to the Customized Volume pane.
Make Volume pane (2)
Use this pane to assign CU and LDEV numbers for the CVS volumes to be created.
Figure 99 Make Volume pane (2)
This pane has the following features:
• CVS volume-setting information table: On the upper right of the pane, displays detailed
information about the CVS volumes to be created.
• Parity Group: Number of the VDEV to be initialized. The VDEV number indicates the parity
group where the VDEV belongs. For example, if VDEV number 1-1-(1) appears, the VDEV
belongs to parity group number 1-1.
NOTE:
If a VDEV number starts with E (for example, E1-1-(1)), the VDEV belongs to a parity group that
consists of one or more external LUs.
NOTE:
If a VDEV number starts with V (for example, V1-1-(1)), the VDEV belongs to a parity group that
consists of one or more virtual volumes (V-VOLs).
• No.: CVS volume's setting number.
• Emulation: CVS volume's emulation type.
• Capacity: CVS volume's capacity displayed in the capacity unit selected from the Capacity
Unit list on the Make Volume pane (1).
• CU:LDEV: CU and LDEV numbers for the CVS volume to be created. The default is blank.
HP StorageWorks LUN Configuration and Security Manager XP user guide for the
XP12000/XP10000/SVS200
189