Dwyer PUX - Manual (Page 72)

9 - 31
9.5.4 To set printing intervals
q Press the or key on the PRINT page,
select “SAMPLING PERIOD” and press the
ENT key. The SAMPLING PERIOD screen is
displayed.
w Move the digit by pressing the or key, and
enter a numeric value by pressing the or
key. Press the ENT key and set the sampling
period.
Setting
In the TEXT mode: 00 : 00
Hour: Minute
In the GRAPH mode: 00 : 00 : 00
Hour: Minute: Second
Example) When printing data in a graph every 20
minutes, set the print period to “00 : 20 : 00”.
9.5.5 To set graph scale in GRAPH mode
[This setting should be done only when the “GRAPH” mode is set.]
q Press the or key on the PRINT page,
select “LEFT” from “SCALE SET” and press
the
ENT key. The screen is displayed, enabling
you to set measured values at LEFT.
w Move the digit by the or key and enter a
numeric value by the or key.
Press the ENT key to set measured value at
LEFT.
e Press the key to set “RIGHT”.
r Set RIGHT in the same manner as in “LEFT”.
t Press the ENT key to return to the previous
screen.
PRINTER
MODE
GRAPH
UNIT L / m i n
TIMER MODE
MANUAL
PRINT OUT
+ TOTAL
— TOTAL OFF
OFF
SAMPLE PERIOD
0 0 : 0 0 : 0 1
SCALE SET
LEFT
RIGHT
0 . 0 0 0 E 0
1 . 0 0 0 E 0
PRINTER
MODE
TEXT
UNIT
FLOW RATE
VELOCITY
+TOTAL
—TOTAL
OFF
OFF
OFF
TIMER MODE
TIMER
0 0 : 0 1
PRINT OUT
ANALOG IN OFF
SAMPLING PERIOD
BULLETIN F-68