Dwyer PUX - Manual (Page 58)

9 - 17
CAUTION
9.3.4 MEASUREMENT METHOD: when changing measurement
method
Measurement method 1 is the standard measurement
method.
The measurement method 2 resists an external
disturbance.
If the method 1 is not available, change it to the
method 2.
The measurement system is automatically selected
according to the kind of sensor or setting of outer
diameter. If the measurement method 2 is automati-
cally selected from the beginning, there is no need to
switch the method. 2. For the method 1 that has been
automatically selected, change to the method 2 is
possible.
9.3.5 MEMORY INITIALIZE: all setting parameters and logger data
are initialized.
Turn off the power after selecting “YES” and then
turn it on again.
Initializing will be started.
If selecting “NO” without turning off the power,
initializing will not be carried out.
Note) Initialized items
All memory data with the exception of
q
Language selected
w Analog input /outpupt calibration value
The measurement method is initialized according to the kind of sensor or outer diameter setting at the
power ON or just when the PIPE PARAMETER screen is displayed on the SITE SETUP page. After
changing from method 1 to method 2, set the measurement method again when the power is turned
OFF or the PIPE PARAMETER screen is displayed.
CAUTION
When the measurement method has been changed from method 1 to method 2, measurement values
are subjected to change.
Analog input/output calibration values and
language selected are held.
CAUTION
CAUTION
After setting, turn off the power once, and turn it
ON again for initializing the memory data
STOP BIT
COMMUNICATION
SYSTEM SETUP SYSTEM SETUP
CLOCK SET 95-06-25 15 : 17 : 00
PARITY
BAUD RATE
SYSTEMSETUP
1 BIT
NONE
300
METRIC
1
SYSTEM OF UNITS
MEASUREMENT METHOD MEASUREMENT METHOD
1
2
MEASUREMENT METHOD
MEMORY INITIALIZE
STOP BIT
COMMUNICATION
SYSTEM SETUP SYSTEM SETUP
CLOCK SET 95-06-25 15 : 17 : 00
PARITY
BAUD RATE
SYSTEMSETUP
1 BIT
NONE
300
METRIC
1
SYSTEM OF UNITS
MEASUREMENT METHOD
MEMORY INITIALIZE
MEMORY INITIALIZE MEMORY INITIALIZE
NO NO
YES
BULLETIN F-68