Dwyer PUX - Manual (Page 15)

4 - 2
4.2 Turning on power supply
q Press the ON switch of the main unit to turn ON the power.
w Turn ON the power, and the following
screen appears.
When the language display is
highlighted (for about 5 sec.), press
the ESC key, and the “LANGUAGE
SELECTION” screen appears.
In the screen that is displayed, select
your desired language and press the
ENT key. It returns to the
“MEASUREMENT” screen.
Language to be set is
displayed.
To select the language
ENT
ENT
ESC
English
Select language
Wahle Sprache
Cholx de la langue
English/ /English/ANGLAIS
Japanese/ /Japanisch/JAPONAIS
German/ /Deutsch/ALLEMAND
French/ /Franzosisch/FRANCAIS
Note:
From the next step, the
language you selected can
be used.
x10
x10
RESET
STOP
STOP
RESET
FLOW RATE UNIT: m3/h
VELOCITY UNIT: m/s
+ TOTAL UNIT: ml
— TOTAL UNIT: ml
95-06-27 11:49
MEASURE
e If there is nothing you can do on the
screen for about 10 sec. the
“MEASURE” screen appears.
Note1) Select any of 4 languages: English, French, German, and Japanese (Katakana)
Note2) To return to the “LANGUAGE SELECTION” screen from the “MEASUREMENT” screen
in display, turn OFF the power once and then turn it ON again. In the initial screen that is
displayed, press the ESC key.
DWYER INSTRUMENTS, INC.
BULLETIN F-68