Dwyer PUX - Manual (Page 21)

6 - 4
6.3 Outer diameter of piping (unit: mm)
(range: 13 to 6100 mm)
Press the key on the “PIPE PARAMETER” screen to
invert the “OUTER DIAMETER”.
Press the
ENT
key, and you can enter the outer dimension.
Use the or key to cause the digit to move in the right
and left direction
Use the or key to enter the numeric.
After entry, press the
ENT
key.
Note) Enter outer dimensions, but not nominal diameter
(example: 20A
→
20).
Outer
diamerer
Outer diameter of piping
SITE SETUP SITE SETUP
SITE SETUP
PIPE MATERIAL
WALL THICKNESS
LINING MATERIAL
KIND OF FLUID
SENSOR MOUNTING
CARBON STEEL
0.01 m m
PIPE PARAMETER PIPE PARAMETER
NO LINING
V
PSX2 B SENSOR TYPE
LINING THICKNESS 0.01 m m
WATER
SITE NAME
4 TIMES TRANS. VOLTAGE
ENT
ENT
OUTER DIAMETER OUTER DIAMETER 0013.0 0 m m
SITE SETUP SITE SETUP
SITE SETUP
PIPE MATERIAL
WALL THICKNESS
LINING MATERIAL
KIND OF FLUID
SENSOR MOUNTING
CARBON STEEL
0.01 m m
PIPE PARAMETER PIPE PARAMETER
NO LINING
V
PSX2 B SENSOR TYPE
LINING THICKNESS 0.01 m m
WATER
SITE NAME
4 TIMES TRANS. VOLTAGE
OUTER DIAMETER OUTER DIAMETER 13.00 m m
PIPE NO.1
Example) When the outer diameter of piping is 318.5 mm:
SITE NAME
PIPE PARAMETER
0013.0 mm
SITE NAME
0318.50mm
PIPE PARAMETER
ENT
OUTER DIAMETER OUTER DIAMETER OUTER DIAMETER OUTER DIAMETER
BULLETIN F-68