Bulletin f-68 – Dwyer PUX User Manual

Page 20

6 - 3

6.2

Entry of site name (measurement is possible without
entry)

Enter the name of the site (where measurement is performed). This name is registered with site memory

(r of page 6 - 2).

Select a character and press the

ENT

key. Characters will be displayed one by one at top of the screen.

Then, select “CLOSE” and press the

ENT

key to complete entry (up to 20 characters can be entered). If

you entered wrong characters, press the

ESC

key and characters can be cleared one by one.

SITE SETUP

PIPE PARAMETER

SITE NAME

Select "CLOSE"
and press the key
to complete entry.

ENT

PIPE NO.1 is selected from SITE NAME.

SITE SETUP

OUTER DIAMETER

PIPE MATERIAL

WALL THICKNESS

LINING MATERIAL

KIND OF FLUID

SENSOR MOUNTING

CARBON STEEL

0.01 m m

PIPE PARAMETER

13.00 m m

NO LINING

PSX2 B

SENSOR TYPE

LINING THICKNESS

0.01mm

WATER

SITE NAME

1 TIME

TRANS, VOLTAGE

PIPE NO. 1

BULLETIN F-68