Dwyer PUX - Manual (Page 25)

6 - 8
6.7 Lining thickness (unit: mm) (range: 0.01 to 100.00 mm)
When the lining material is set to items other than
“None” in 6.6 Lining material.
P r e s s t h e k e y t o i n v e r t t h e “ L I N I N G
THICKNESS”.
Press the
ENT
key, the lining thickness numeric entry
can be performed.
The cursor can shift the numeric digit by using the
or key. The numeric can be entered by using the
or key.
After entry, press the
ENT
key.
SITE SETUP SITE SETUP
SITE SETUP
PIPE MATERIAL
WALL THICKNESS
LINING MATERIAL
KIND OF FLUID
SENSOR MOUNTING
CARBON STEEL
PIPE PARAMETER PIPE PARAMETER
NO LINING
V
PSX2 B SENSOR TYPE
WATER
SITE NAME
4 TIMES TRANS. VOLTAGE
ENT
ENT
OUTER DIAMETER 318.50 m m
SITE SETUP SITE SETUP
SITE SETUP
PIPE MATERIAL
LINING MATERIAL
KIND OF FLUID
SENSOR MOUNTING
CARBON STEEL
0.01 m m
PIPE PARAMETER PIPE PARAMETER
NO LINING
V
PSX2 B SENSOR TYPE
0.01mm
WATER
SITE NAME
4 TIMES TRANS. VOLTAGE
OUTER DIAMETER 318.50 m m
PIPE NO.1
WALL THICKNESS
0.01 m m
000.0 1 mm LINING THICKNESS
LINING THICKNESS
Example) When the lining thickness is 1.25 mm
KIND OF FLUID
000.0 mm 001.25mm ENT
WATER
LINING MATERIAL MORTAR
LINING THICKNESS LINING THICKNESS
LINING MATERIAL MORTAR
KIND OF FLUID WATER
LINING THICKNESS LINING THICKNESS
BULLETIN F-68