Dwyer PUX - Manual (Page 23)

6 - 6
6.5 Wall thickness (unit: mm) (range: 0.01 to 100.00mm)
Press the key to invert the “WALL THICKNESS”.
Press the
ENT
key, and wall thickness can be entered (See
pages 15 -1 to 15 - 6, Piping Data ).
Use the
or key to move the digit to the right and
left.
Using the or key, enter the numeral. After entry,
press the
ENT
key.
Wall thickness Lining thickness
Lining and wall thickness of piping
SITE SETUP SITE SETUP
SITE SETUP
PIPE MATERIAL
WALL THICKNESS
LINING MATERIAL
KIND OF FLUID
SENSOR MOUNTING
CARBON STEEL
PIPE PARAMETER PIPE PARAMETER
NO LINING
V
PSX2B SENSOR TYPE
LINING THICKNESS 0.01 mm
WATER
SITE NAME
4 TIMES TRANS. VOLTAGE
ENT
ENT
OUTER DIAMETER OUTER DIAMETER 318.50 mm
SITE SETUP SITE SETUP
SITE SETUP
PIPE MATERIAL
LINING MATERIAL
KIND OF FLUID
SENSOR MOUNTING
CARBON STEEL
0.01 m m
PIPE PARAMETER PIPE PARAMETER
NO LINING
V
PSX2 B SENSOR TYPE
LINING THICKNESS 0.01mm
WATER
SITE NAME
4 TIMES TRANS. VOLTAGE
OUTER DIAMETER 318.50 m m
PIPE NO.1
WALL THICKNESS
0.0 1 mm
000.0 mm 001.25mm ENT
PIPE MATERIAL CAST IRON
LINING MATERIAL NO LINING
WALL THICKNESS
PIPE MATERIAL CAST IRON
LINING MATERIAL NO LINING
WALL THICKNESS
Example) When the wall thickness is 1.25mm
BULLETIN F-68