Dwyer PUX - Manual (Page 64)

9 - 23
9.5 Use of printer function (PRINTER page)
It allows you to print measured value as well as hard copy on an optional printer. On this page, setting for
printing measured values can be performed.
9.5.1 Selection of mode
q Move the cursor to “MODE” on the PRINTER page and press the ENT key. The “MODE” screen is
displayed. Select any of the modes of “TEXT”, “GRAPH”, and “LIST” by the or key and
press the ENT key. For the meaning of each mode, refer to an example of the following printing.
95-11-27 19 : 04 : 17
5.000E-3 m/s
2.323E-3 m3/h
NORMAL
95-11-27 19 : 05 : 17
Example of printout Example of printout
TIME=11-27 19:06:00 / UNIT:m/s
Example of printout
Site setup
Site name
Outer diameter
Pipe material
Wall thickness
Lining material
34.00mm
Carbon steel
3.20mm
No lining
123 0.000E0 1.000E0
-123456 +123456
PRINTER
MODE
LIST
SITE SETTING LIST OFF
SYSTEM SETTING LIST OFF
ANALOG LIST OFF
SITE NAME ( 123 )
PRINT RUN
PRINTER
MODE MODE
TEXT TEXT
UNIT
FLOW RATE
VELOCITY
+
TOTAL
— TOTAL
OFF
OFF
OFF
TIMER MODE
TIMER
SAMPLING PERIOD
0 0 : 0 1
PRINT OUT
ANALOG IN OFF
PRINTER
MODE
GRAPH
UNIT m / s
TIMER MODE
MANUAL
PRINT OUT
+ TOTAL
— TOTAL ON
ON
SAMPLE INTERVAL
0 0 : 0 0 : 0 1
SCALE SET
LEFT
RIGHT
- 1 . 0 0 0 E 0
0 . 0 0 0 E 0
MODE
TEXT
FLOW RATE UNIT
MODE MODE
TEXT
GRAPH
LIST
Prints data for selected unit in
industrial value.
Date and time
Selected item
Measured
status
Prints data for selected unit in graph. Selected list
Reverse total value Forward total value Sampling period
TEXT mode GRAPH mode
LIST mode
BULLETIN F-68