Dwyer PUX - Manual (Page 22)

6 - 5
6.4 Piping material
Press the key to invert the “PIPE MATERIAL”.
Press the
ENT
key, and the “PIPE MATERIAL” screen will appear.
Select the material by using the or key. After entry, press
the ENT key.
Note) If you select “OTHER”, enter the sound velocity
(range: 1000 to 3700m/s). See page 15 - 6, Table @1.
ENT
ENT
SITE SETUP SITE SETUP
SITE SETUP
PIPE PARAMETER PIPE PARAMETER
V
SITE NAME
OUTER DIAMETER
PIPE MATERIAL PIPE MATERIAL
WALL THICKNESS
LINING MATERIAL
KIND OF FLUID
SENSOR MOUNTING
CARBON STEEL
0.01 m m
NO LINING
PSX2 B SENSOR TYPE
LINING THICKNESS 0.01 m m
WATER
4 TIMES TRANS. VOLTAGE
318.50 m m
SITE SETUP SITE SETUP
SITE SETUP
PIPE PARAMETER PIPE PARAMETER
SITE NAME
OUTER DIAMETER
PIPE MATERIAL PIPE MATERIAL
WALL THICKNESS
LINING MATERIAL
KIND OF FLUID
SENSOR MOUNTING
SENSOR TYPE
LINING THICKNESS
TRANS, VOLTAGE
PIPE MATERIAL PIPE MATERIAL
STAINLESS STEEL
CAST IRON
COPPER
PVC
ALUMINUM
DUCTILE IRON
ASBESTOS
FRP
CARBON STEEL CARBON STEEL
PIPE NO.1
Example) When the piping material is cast iron:
CAST IRON
STAINLESS STEEL STAINLESS STEEL
CARBON STEEL ENT CARBON STEEL CARBON STEEL
CAST IRON CAST IRON
PIPE MATERIAL PIPE MATERIAL PIPE MATERIAL PIPE MATERIAL
BULLETIN F-68