1 how to use site setup function (site setup page), Bulletin f-68, Operation – Dwyer PUX User Manual
Page 43: Key. w move the cursor to “mode” and press the
9 - 2
9.1
How to use SITE SETUP function (SITE SETUP page)
9.1.1 PARAMETER MEMORY: when registering data which are set
and calibrated on the page
[Operation]
q
Select “PARAMETER MEMORY” by
pressing the
or
key on the SITE
SETUP page.
Press the
ENT
key, and the
“PARAMETER MEMORY” screen is
displayed. To return to the “SITE
SETUP” screen, press the
ESC
key.
w
Move the cursor to “MODE” and press
the
ENT
key. The mode selection
screen will appear.
When pressing the
ENT
key after mode
selection, the relevant mode is
determined.
e
To select “SAVE” or “LOAD”, select a name (No.) of a site by using the cursor and press the
ENT
key. So, this function enables you to save and load the data.
Note) When using the “SAVE” function, it is
necessary to enter “SITE NAME” in
advance.
The name set in the “SITE NAME” given on
page 6-3, “PIPE PARAMETER” is saved.
r
When selecting “DELETE”, select the site name
(No.) by using the cursor, and press the
ENT
key, so the data will be deleted. Be careful since
registered pipe parameter data are deleted.
“PARAMETER MEMORY” allows you to register data which are set and calibrated on the “SITE SETUP”
page to the memory of the main unit.
When measurements are performed in the same pipe, registered data can be loaded to help you in achiev-
ing measurements. (Up to 20 registrations of data can be made to the memory.)
SITE SETUPSITE SETUP
SITE SETUP
PARAMETER MEMORY
PIPE PARAMETER
ZERO ADJUST
RESPONSE SET
CALIBRATION
CUT OFF
TOTALIZE
MANUAL ZERO
0 s e c
0 . 0 0 0 m/s
--- SENSOR SPACING ---
126.7mm
ESC
ENT
SITE SETUP
MODE
No
SAVE
LOAD NAME
SITE NAME
1
2
3
4
5
6
7
8
9
10
SITE SETUP
MODE
No
SAVE
LOAD NAME
SITE NAME
1
2
3
4
5
6
7
8
9
10
MODE
LOAD
SAVE
Stores the contents
of setting in memory.
Reads out the
contents of setting.
DELETE
Deletes the contents
of setting.
95-06-27 13:12
SITE SETUP
MODE
No
SAVE
LOAD NAME
SITE NAME
1
2
3
4
5
6
7
8
9
10
SGP 1'
SGP 1'
SGP 1'
Indicates the
read name.
SGP 1 1/4'
SGP 1 1/2'
SGP 2'
SGP 2 1/2'
SGP 3'
SGP 3 1/2'
SGP 4'
SGP 5'
SGP 6'
BULLETIN F-68