KROHNE MFC 300 EN - Manual (Page 92)

6
OPERATION
92
MFC 300
www.krohne.com 02/2012 - 4000498602 - MA MFC 300 R03 en
No. Function Settings / descriptions
C5 I/O HART
C5 I/O HART Selection / display of the 4 dynamic variables (DV) for HART ® .
The HART ® current output (terminal A basic I/Os or terminal C modular I/Os)
always has a fixed link to the primary variables (PV). Fixed links of the other
DVs (1-3) are only possible if additional analogue outputs (current and
frequency) are available; if not, the measurement can be freely selected
from the following list: in Fct. A4.1 "measurement".
stands for 1, 2, 3 or 4
X stands for connection terminals A...D
C5.1 PV is Current output (primary variable)
C5.2 SV is (secondary variable)
C5.3 TV is (tertiary variable)
C5.4 4V is (4th variable)
C5.5 HART Units Changes units of DVs (dynamic variables) in the display
Break: return with ^ key
HART display ® : copies the settings for the display units to the settings for
DVs
Standard: sets factory defaults for DVs
C5. .1 Current Output X Shows the current analogue measured value of the linked current output.
The measurement cannot be changed!
C5. .1 Frequency Output X Shows the current analogue measured value of the linked frequency output,
if present. The measurement cannot be changed!
C5. .1 HART Dynamic Var. Measurements of the dynamic variables for HART ® .
Linear measurements: Volume Flow / Mass Flow / Diagnosis Value /
Fow Velocity
Digital measurements: Totaliser 1 / Totaliser 2 / Totaliser 3 / Operating
hours
No. Function Settings / descriptions
C6 Device
C6.1 Device Info
C6.1 Device Info
C6.1.1 Tag Settable characters (max. 8 digits):
A…Z; a…z; 0…9; / - , .
C6.1.2 C Number CG number, non-alterable (I/O version)
C6.1.3 Device Serial No. Serial no. of the system, cannot be changed
C6.1.4 BE Serial No. Serial no. of the electronic assembly, cannot be changed.
C6.1.5 SW.REV.MS Serial no. of the circuit board, version no. of the main software, production
date of the circuit board
C6.1.6 Electronic Revision ER Shows ID no., electronic revision no. and production date;
Contains all hardware and software changes.
.book Page 92 Monday, February 6, 2012 11:01 AM