KROHNE MFC 300 EN - Manual (Page 136)

8
TECHNICAL DATA
136
MFC 300
www.krohne.com 02/2012 - 4000498602 - MA MFC 300 R03 en
Operating conditions
Temperature Temperature Temperature Temperature
Process temperature Refer to technical data for the measuring sensor.
Ambient temperature Depending on the version and combination of outputs.
It is a good idea to protect the converter from external heat sources such as direct
sunlight as higher temperatures reduce the life cycle of all electronic components.
-40...+65°C / -40…+149°F
Stainless steel housing: -40…+55°C / -40…+131°F
Ambient temperatures below -25°C / -13°F may affect the readability of the display.
Storage temperature -50…+70°C / -58…+158°F
Pressure Pressure Pressure Pressure
Medium Refer to technical data for the measuring sensor.
Ambient pressure Atmosphere
Media properties Media properties Media properties Media properties
State of aggregation Liquids, gases and slurries
Flow rate Refer to technical data for the measuring sensor.
Other conditions Other conditions Other conditions Other conditions
Protection category acc. to IEC
529/ EN 60529
C (compact version) & F (field housing):
IP66/67 (acc. to NEMA 4/4X)
W (wall-mounted housing):
IP 65 (acc. to NEMA 4/4x)
R (19" rack-mounted housing):
IP20 (acc. to NEMA 1)
Installation conditions
Installation For detailed information, refer to chapter "Installation conditions".
Dimensions and weights For detailed information refer to section "Dimensions and weights".
.book Page 136 Monday, February 6, 2012 11:01 AM