KROHNE MFC 300 EN - Manual (Page 84)

6
OPERATION
84
MFC 300
www.krohne.com 02/2012 - 4000498602 - MA MFC 300 R03 en
C1.7 Factory Calib.
C1.7 Factory Calib.
C1.7.1 Sensor Type Displays the sensor type
C1.7.2 Sensor Size Displays the nominal size of the sensor
C1.7.3 Sensor Material Displays the material of the sensor
C1.7.4 Max. Allowed Temp. Displays the maximum permitted temperature for the sensor
C1.7.5 Min. Allowed Temp. Displays the minimum permitted temperature for the sensor
C1.7.6...
1.7.30
CF1...CF27 Displays the sensor calibration coefficients (not CF9 or CF10)
C1.8 Simulation
C1.8 Simulation
C1.8.1 Mass Flow As in B1.1
C1.8.2 Density As in B1.2
C1.8.3 Temperature As in B1.3
No. Function Settings / descriptions
C2 Concentration
C2 Concentration See supplementary concentration manual
C3 I/O (Inputs/Outputs)
C3.1 Hardware
C3.1 Hardware Assignment of connection terminals dependent on signal converter version:
active / passive / NAMUR
C3.1.1 Terminal A Select: Off (switched off) / Current Output / Frequency Output /
Pulse Output / Status Output / Limit Switch / Control Input
C3.1.2 Terminal B Select: Off (switched off) / Current Output / Frequency Output /
Pulse Output / Status Output / Limit Switch / Control Input
C3.1.3 Terminal C Select: Off (switched off) / Current Output / Status Output / Limit Switch
C3.1.4 Terminal D Select: Off (switched off) / Frequency Output / Pulse Output / Status Output /
Limit Switch
.book Page 84 Monday, February 6, 2012 11:01 AM