KROHNE MFC 300 EN - Manual (Page 19)

DEVICE DESCRIPTION
2
19
MFC 300
www.krohne.com 02/2012 - 4000498602 - MA MFC 300 R03 en
2.3.3 Electrical connection data of inputs/outputs (example of basic version)
• A = active mode; the signal converter supplies the power for connection of the subsequent
devices
• P = passive mode; external power supply required for operation of the subsequent devices
• N/C = connection terminals not connected
Figure 2-7: Example of a nameplate for electrical connection data of inputs and outputs
1 Power supply (AC: L and N; DC: L+ and L-; PE for ≥ 24 VAC; FE for ≤ 24 VAC and DC)
2 Connection data of connection terminal D/D-
3 Connection data of connection terminal C/C-
4 Connection data of connection terminal B/B-
5 Connection data of connection terminal A/A-; A+ only operable in the basic version
.book Page 19 Monday, February 6, 2012 11:01 AM