beautypg.com

Electrical connections – KROHNE MFC 300 EN User Manual

Page 29

background image

ELECTRICAL CONNECTIONS

4

29

MFC 300

www.krohne.com

02/2012 - 4000498602 - MA MFC 300 R03 en

4.4.1 Connection of signal cable, field housing

1 Remove the locking screw and open the housing cover.
2 Pass the prepared signal cable through the cable entry.
3 Secure the signal cable using the clip.
4 Connect the electrical conductors as shown. The shielding is connected to terminal S.
5 Close the housing cover and secure it with the locking screw.

Figure 4-1: Electrical connection of the signal cables, field housing

a = white
b = green
c = black
d = red

INFORMATION!
Each time a housing cover is opened, the thread should be cleaned and greased. Use only resin-
free and acid-free grease.
Ensure that the housing gasket is properly fitted, clean and undamaged.

.book Page 29 Monday, February 6, 2012 11:01 AM