Lincoln Electric IM8002 POWER WAVE MANAGER - Manual (Page 90)

Chapter 10. Production Monitoring Configuration
10.12 Power Wave® Manager User Manual IM8002
E-mail Setup Tab
The E-mail setup tab provides you with the ability to configuration e-mail alerts (such as system events and
wire package warnings) for up to 12 e-mail addresses. This requires collecting a bit of information before
you begin.
NOTE | When you enable CheckPoint™, the options on this tab are
disabled. E-mail notifications are processed from the data
center rather than by the power source. Please refer to the
CheckPoint™ User Manual for more information.
Before setting up the Welding Power Source to send e-mails, collect the following information:
 List of e-mail addresses that will receive e-mail alerts
 IP address (or host name) of the SMTP e-mail server
 IP address (or host name) of the DNS server the power source should use for e-mail
 Port number on which the e-mail server receives e-mail
TIP | Contact your local IT department for assistance on
obtaining the information about the e-mail server or
the DNS server.
Figure 10.8 E-mail Setup Tab